May 2020 Vol. 5

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Keep Up-to-Date During Corona Isolation with PPN


NEWSMAKERS:  * Chevron Phillips  * ExcelPlas * Friatec * GEM Industrial * HOBAS * IPLEX * McElroy * REHAU * Uponor * Vinidex

Iplex Parent Fletcher Building Sacks 1500 as Economy Sours (Breaking News)
https://www.afr.com/companies/infrastructure/fletcher-building-sacks-1-500-as-economy-sours-20200520-p54um8

Iplex Parent Fletcher Building to shed Aus and NZ Jobs (Breaking News)
https://www.news.com.au/world/breaking-news/fletcher-building-to-shed-aus-and-nz-jobs/news-story-c2944f10f5eaa0c2a089ba5ef8f5d38f

Chevron Phillips Technical Note Resource Centre for PE Pipes
https://www.cpchem.com/what-we-do/solutions/performance-pipe/resources

Importance of HLMI and Density Testing in the Manufacturing and Butt Fusion of HDPE Pipes
ExcelPlas has developed software to record and track high load melt index (HLMI) and density and their effects on butt fusion weld integrity. The software sets allowable ranges for HLMI and density for successful butt-fusion welding that overcomes the anticipated batch variability of PE100 polyethylene compounds.  The tracking of HLMI and density allows the ‘window’ of weldability to be determined by restricting essential polymer parameters such as melting, crystallization, and viscosity properties within limited ranges. 
https://www.excelplas.com/

$61Mill HDPE Water Pipeline Being Installed On Central Coast
https://www.pipeliner.com.au/2020/05/19/mardi-to-warnervale-construction-underway/

Research of Possibility of Application of Hot Tool Flare Welding for Polyethylene Gas Pipelines Construction
https://www.scientific.net/MSF.992.36

Identification and Feature Extraction of Drainage Pipeline Cracks Based on SVD and Edge Recognition Method
https://ieeexplore.ieee.org/abstract/document/9095153

Failure Analysis of the Polypropylene Pipe
https://www.scientific.net/MSF.989.22

Maintainability and Reliability of HDPE Pipes Through Experimental and Theoretical Models
https://www.sciencedirect.com/science/article/pii/S2452321620303826

Study on Fatigue Failure of Glass Fibre-Reinforced Thermoplastic Pipe
https://iopscience.iop.org/article/10.1088/2053-1591/ab8845/pdf

HOBAS GRF Liner Pipe for Key Sewer Relining
http://www.materialsperformance.com/articles/material-selection-design/2016/08/niagara-falls-revamps-key-sewer-line-with-liner-piping

George Fischer Product Appraisal iJOINT Polypropylene Compression Fittings for PE Pipe
https://www.wsaa.asn.au/appraisal/george-fischer-pty-ltd-ijoint-polypropylene-compression-fittings-pe-pipe

Nupi Industrie Italiane Product Appraisal for EloFIT PE100 Fittings for PE Pipe
https://www.wsaa.asn.au/appraisal/nupi-industrie-italiane-spa-elofit-pe100-fittings-pe-pipe


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australian Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3 mm to 80 mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia & NZ. All testing is carried and out in accordance with ISO & ASTM methods and is fully accredited to ISO 17025 by NATA.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 20mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia and Asia. 
All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.
• Butt Fusion Weld Testing
• Weld Testing
• Testing of Electro-fusion Welds
• Tear on saddle joints
• Crush De-cohesion of Electro-fusion welds
• Polymer & Plastics Identification
• Chemical & Thermal Testing
• Site Audits
http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.
  • http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:
• Lack of scraping
• Inaccurate scraping
• Contamination from dirt, water, oil or clays
• Lack of Paralell-ness of fusion faces
• Misalignment of surfaces
• Time, temperature and pressure deviations
• Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact john@excelplas.com

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to john@excelplas.com
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2020 Copyright ExcelPlas Labs 🔬

May 2020 Vol. 4

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Failure

Keep Up-to-Date During Corona Isolation with PPN


NEWSMAKERS:  * Borealis  * ExcelPlas * Friatec * GEM Industrial * IPLEX * McElroy * Pipeline Supplies and Hire (PSAH)  * REHAU * RWC * UEA * Uponor * Vinidex

GEM Industrial Undertake Construction of the Southern Hemisphere’s First 1800 mm SDR41 HDPE Pipeline
https://www.pipeliner.com.au/2020/05/13/collaboration-key-on-landmark-pipeline-project/

Video of Loading of Chinese HDPE DN900mm SDR9 pipe into Containers for Australia
https://www.youtube.com/watch?v=SVcHkykpp5U

Formation and Sorption of Trihalomethanes From PEX Pipes following Chlorinated Water Exposure (Breaking News)
https://pubs.rsc.org/en/Content/ArticleLanding/2020/EW/D0EW00262C#!divAbstract

PEX Pipes Implicated in Toxic Disinfection Byproducts from Potable Water (Breaking News)
https://docs.lib.purdue.edu/dissertations/AAI10684433/

Borealis Polyethylene Plant Fire Affects HDPE Pipe Resin Supply (Breaking News)
https://www.industrialfireworld.com/554629/polyethylene-plant-fire-breaks-out-in-sweden

Major Fire at Borealis HDPE Resin Plant – Return to Operations Unclear (Breaking News)
https://www.icis.com/explore/resources/news/2020/05/10/10506093/fire-at-borealis-stenungsund-sweden-cracker-extinguished-return-to-operations-unclear

Borealis Declares Force Majeure Following Fire Incident in Sweden at HDPE Plant (Breaking News)
https://chemweek.com/CW/Document/111203/Borealis-declares-force-majeure-following-fire-incident-in-Sweden

Reliance Worldwide Corporation (ASX:RWC) to Scale Back Australian Operations (Breaking News)
https://www.finnewsnetwork.com.au/archives/finance_news_network275801.html

New Electrofusion Welder with Bluetooth Interface
The new FRIAMAT™ prime eco with traceability, documentation, and Bluetooth® interface. Toroidal transformer technology with active cooling for reduced process times. 
https://www.vinidex.com.au/app/uploads/pdf/Friamat_How-to-guide_Welder_A4_V4.pdf

McElroy Pipe Welders Receives Competency Approval for Victoria 
http://cloud.excelplas.com/s/sssnNMDRXFEkIBP/download​

The Best in Butt Fusion Welding Machines
http://cloud.excelplas.com/s/tHIitj8iniGqQ4Y/download​

PEX Pipe Taking the Heat in Construction
https://content.yudu.com/web/1rl19/0A1utvq/PPENovDec19/html/index.html?page=28&origin=reader

PEX Piping Industry Matures
http://plumbingandhvac.ca/pex-piping-industry-matures/

Environmental Stress Cracking (ESC) and Slow Crack Growth (SCG) of HDPE Pipe Induced by External Fluids
http://tuprints.ulb.tu-darmstadt.de/11544/

ExcelPlas Labs Determine Failure Mechanisms and Estimated Llifetime of Polymer Pipes
ExcelPlas specialise in Mode III failure of polymer pipes which is related to degradation and embrittlement of the plastic due to thermo-oxidation with time. Assuming Stage II failure is inhibited during service, due to correct design, installation and accurate qualification of material properties, it is Stage III which will ultimately determine the lifetime of a pipe material. Resistance to Stage III will be dependent on specialist additive packages added to polymer during manufacture to protect it from thermo-oxidative attack. Once these additives have been depleted, the onset of Stage III failure will commence rapidly.  PP-R, PEX and PB piping systems can experience premature oxidative (brittle) failures in potable water distribution systems.
https://www.excelplas.com/wp-content/uploads/2020/01/Excelplas-A4-Brochure-4pp-Plastic-Pipe-Testing-NTs.pdf

FAQs on the Performance of CPVC in Residential Plumbing
https://www.flowguardgold.com/blog/frequently-asked-questions-on-the-performance-of-cpvc-in-residential-plumbing

Iplex Pipelines Seeking Estimator for Large HDPE Pipe Projects
https://au.linkedin.com/jobs/view/estimator-at-iplex-au-1861294879

500 mm HDPE Pipe Used in Logan City HDD Crossing Construction
https://www.uea.com.au/wp-content/uploads/2020/05/Logan-River-Service-Crossing-Construction.pdf


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australian Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3 mm to 80 mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia & NZ. All testing is carried and out in accordance with ISO & ASTM methods and is fully accredited to ISO 17025 by NATA.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 20mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia and Asia. 
All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.
• Butt Fusion Weld Testing
• Weld Testing
• Testing of Electro-fusion Welds
• Tear on saddle joints
• Crush De-cohesion of Electro-fusion welds
• Polymer & Plastics Identification
• Chemical & Thermal Testing
• Site Audits
http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.
  • http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:
• Lack of scraping
• Inaccurate scraping
• Contamination from dirt, water, oil or clays
• Lack of Paralell-ness of fusion faces
• Misalignment of surfaces
• Time, temperature and pressure deviations
• Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact john@excelplas.com

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to john@excelplas.com
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2020 Copyright ExcelPlas Labs 🔬

May 2020 Vol. 3

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Failure

Keep Up-to-Date During Corona Isolation with PPN


NEWSMAKERS:  *Aquatherm * Borealis  * ExcelPlas * GF Piping * IPLEX * McElroy * Plasson * REHAU  * SCG * TUBI * Uponor * Viega * Vinidex

Australian TUBI Opens Third Production Plant for HDPE Pipe in Florida
https://themarketherald.com.au/tubi-asx2be-opens-third-production-plant-in-florida-2020-05-11/

Australian HDPE Pipe Production Company Expansion Plans for USA (Declassified)
https://www.asx.com.au/asxpdf/20200311/pdf/44fxtltblrmm82.pdf

Townsville Specifies Vinidex’s New Chlorine Resistant HDPE Piping
https://www.vinidex.com.au/app/uploads/pdf/20200507-Chlorblue_Townsville-specifies-Chlorblue_Case-Study.pdf

Gold Coast Sees 900 m Long HDPE Pipeline Being Towed Along Broadwater
http://www.mygc.com.au/watch-900-metre-long-pipe-towed-along-broadwater/

McElroy and Weldmaster – The Best in Butt Fusion Machines for HDPE Piping
https://utilitymagazine.com.au/mcelroy-and-weldmaster-the-best-in-butt-fusion-machines/

China HDPE Pipe Prices Rise on Robust Demand, Tight Supply
https://www.icis.com/explore/resources/news/2020/05/11/10506177/china-hdpe-pipe-prices-rise-on-robust-demand-tight-supply

Borealis Patent New HDPE for Pressure Resistant PE Pipes
https://patentscope.wipo.int/search/en/detail.jsf;jsessionid=064BEEE8FCDAD554526FE921C7274143.wapp2nA?docId=WO2020089003

Slow Crack Growth Test Methods for Service Life Prediction of High Density Polyethylene Piping
https://asmedigitalcollection.asme.org/pressurevesseltech/article-abstract/doi/10.1115/1.4046884/1082579/Constraint-Effects-in-Slow-Crack-Growth-Test?redirectedFrom=PDF

AXEO Uses HDPE Pipe for Trenchless Pipelaying
https://elydan.eu/en/case-report-axeo-uses-hdpe-for-its-trenchless-pipelaying/

Effects of Perforation Geometry on Pipe Drainage in Agricultural Lands
https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29IR.1943-4774.0001482?af=R&

SCG HDPE Pipe – Enhance the Quality and Standards of Infrastructure
https://www.scgchemicals.com/en/news-media/feature-story/detail/4

Meeting GF Piping at Data Centre World London 2020 (Video)
https://www.youtube.com/watch?v=gurBbc7V84c

Delicate marine operation involving 13 vessels towing the polyethylene pipe down the Broadwater from The Spit arriving at Waterways Drive, adjacent to the carpark at Pelican Beach
https://www.miragenews.com/our-water-future-s-in-pipeline/

First Graphene and Hexcyl to Collaborate on Graphene-enhanced HDPE Piping Project
https://www.graphene-info.com/first-graphene-and-hexcyl-collaborate-graphene-enhanced-hdpe-project

Viega Announces Vertical Integration in PEX Manufacturing
https://www.contractormag.com/piping/article/20880281/viega-announces-vertical-integration-in-pex-manufacturing

California Approves PEX for Plumbing — Again
https://www.contractormag.com/plumbing/article/20879315/california-approves-pex-for-plumbing-again

ICC-ES Issues Uponor PMG Listing for AquaSAFE™ System
https://www.contractormag.com/codes/article/20884082/icces-issues-uponor-pmg-listing-for-aquasafe-system

New Industrial Technical Committee Formed to Support Use of Polypropylene (PP-R, PP-RCT) Pipe 
https://www.contractormag.com/piping/article/20883414/new-industrial-technical-committee-formed-to-support-use-of-polypropylene-pipe

Aquatherm North America Celebrates Opening of New Headquarters
https://www.hpac.com/piping-pumping/article/20929136/aquatherm-north-america-celebrates-opening-of-new-headquarters

Assessing Remaining Service Life of Polyolefin Pipes (HDPE, PEX, PP-R, PB) (How Long Will My Pipes Last?)
ExcelPlas has developed Protocol for Determining the Remaining Service Life of In-Service HDPE Pipelines
The 5 step protocol is based on lab testing to measure the following:

  1. The oxidative induction time (OIT) profiling to assess whether or not oxidation protection is still afforded by the stabilising additives.
  2. Measure the carbonyl index (CI) to assess extent of any polymer oxidation that has occurred.
  3. Determine the critical CI at which oxidative stress cracking (OSC) is initiated.
  4. Measure oxidative stress cracking resistance (OSCR) to determine the time until OSC is initiated.
  5. Measure the depth of micro cracking on 180 degree bent coupons by Scanning Electron Microscopy
http://www.excelplas.com/
  • PPN Now Offering Digital Ads, Featured Articles and Premium Positioning
  • PPN Can Publish Press Releases and Time Sensitive Messages Instantly to a Global Geosynthetic Audience

ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australian Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3 mm to 80 mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia & NZ. All testing is carried and out in accordance with ISO & ASTM methods and is fully accredited to ISO 17025 by NATA.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 20mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia and Asia. 
All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.
• Butt Fusion Weld Testing
• Weld Testing
• Testing of Electro-fusion Welds
• Tear on saddle joints
• Crush De-cohesion of Electro-fusion welds
• Polymer & Plastics Identification
• Chemical & Thermal Testing
• Site Audits
http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.
  • http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:
• Lack of scraping
• Inaccurate scraping
• Contamination from dirt, water, oil or clays
• Lack of Paralell-ness of fusion faces
• Misalignment of surfaces
• Time, temperature and pressure deviations
• Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact john@excelplas.com

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to john@excelplas.com
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2020 Copyright ExcelPlas Labs 🔬

May 2020 Vol. 2

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Failure

Keep Up-to-Date During Corona Isolation with PPN


NEWSMAKERS:  *Aliaxis * DIPRA  * ExcelPlas * IPLEX * Plasson * REHAU  * Vinidex

Material Selection for Water Pipes by the Multi-Objective Decision-Making Method: The Case of Alternative Materials for PVC Pipes
https://www.researchgate.net/publication/341120909-Material-Selection-for-Water-Pipes-by-the-Multi-Objective-Decision-Making-Method-The-Case-of-Alternative-Materials-for-PVC-Pipes

HDPE Pipes Susceptible to Chlorine-Induced Oxidation Warns DIPRA
https://www.dipra.org/news-events/news/27-opinions-and-commentary/397-chlorine-disinfectant-stressful-effect-on-hdpe-pipe

Optimization of Cooling Time for Polyethylene Fusion Joints
https://www.sciencedirect.com/science/article/pii/S221478532032767X

Experimentation and Optimization of HDPE Pipe Electro Fusion and Butt Fusion Welding Processes
https://www.sciencedirect.com/science/article/pii/S2214785320322987

Experimental and Numerical Analysis of Failure in Flexible Pipe by a Mechanism of Intentional Damage
https://link.springer.com/article/10.1007/s12206-020-0419-6

Benefits of Polyethylene Butt Fusion Joints for Plastic Pipes
https://www.azom.com/materials-video-details.aspx?VidID=63

Environmental Stress Cracking (ESC) and Slow Crack Growth (SCG) of PE-HD Induced by External Fluids
http://tuprints.ulb.tu-darmstadt.de/11544/

Change of Some Characteristics of HDPE Pipes Tested in Seawater
https://onlinelibrary.wiley.com/doi/abs/10.1002/vjch.201900196

Detection of Ground-motion-induced HDPE Pipeline Deformation using BOTDR Measurements
https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11380/113800W/Detection-of-ground-motion-induced-pipeline-deformation-using-BOTDR-measurements/10.1117/12.2559131.short?webSyncID-ec7a49da-b6a0-cbad-0593-29ad883c9d90&sessionGUID=2bc9993c-ed26-8bea-d49a-28531ab0d3a6&SSO=1

Aliaxis Share Price Is Down 35% So Some Shareholders Are Getting Worried
https://finance.yahoo.com/news/aliaxis-ebr-094124352-share-price-063439859.html

Plasson Industries Share Price Is Down 16% So Some Shareholders Are Getting Worried
https://simplywall.st/stocks/il/capital-goods/tase-plsn/plasson-industries-shares/news/the-plasson-industries-tlvplsn-share-price-is-down-16-so-some-shareholders-are-getting-worried/

A Bottom-Up Approach to Renewing Aging Water Infrastructure
https://ascelibrary.org/doi/full/10.1061/%28ASCE%29WR.1943-5452.0001217

ExcelPlas Polymer Testing Laboratory for Polymer Pipe Testing
Materials characterization, failure analysis, quality control, and materials and process development services are offered to polymer pipe manufacturers, installers and end users.  Our analytical techniques allow us to assess elemental and chemical material composition, thermal properties, coating thickness, electrochemical properties, surface chemistry, surface wetting, corrosion rates and pitting potentials, contamination and degradation problems, metallography, fractography, phase transitions, static coefficient of friction, adhesive bonding strength and causes of adhesive bonding failures, surface tension and surface energy, tensile and compressive strength, bend deflection, elasticity properties, UV and visible light absorption and reflection, density and porosity, and many other material properties integral to improving your piping products.  We have conducted analyses on a broad range of materials processed in a multitude of ways and used in thousands of applications in many hundreds of environments.
https://www.excelplas.com/

Our capabilities give us many powerful tools to apply to your materials and process evaluations to enhance your product and productivity. We produce comprehensive written reports to ensure that you can fully understand and independently examine the analytical results and conclusions. This establishes a documented history for future process and product development and quality control issues.  It is usually a great idea to also characterize your materials when all appears fine as a baseline for comparison should any future problems with your materials or their processing occur.
https://www.excelplas.com/

Australian Poly Solutions Specialises in HDPE Pipe Fusion Welding and Hydrostatic Testing Services with Knowhow and Experience you can rely on
https://www.aussiepoly.com.au/

RITMO: APP – SET & GO! PRO Butt Fusion for Pressure Pipe
https://www.ritmo.it/en/butt-fusion-for-pressure-pipe/app-set-go-pro/
Video: https://youtu.be/YP4GmmBdufU


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australian Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3 mm to 80 mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia & NZ. All testing is carried and out in accordance with ISO & ASTM methods and is fully accredited to ISO 17025 by NATA.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 20mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia and Asia. 
All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.
• Butt Fusion Weld Testing
• Weld Testing
• Testing of Electro-fusion Welds
• Tear on saddle joints
• Crush De-cohesion of Electro-fusion welds
• Polymer & Plastics Identification
• Chemical & Thermal Testing
• Site Audits
http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.
  • http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:
• Lack of scraping
• Inaccurate scraping
• Contamination from dirt, water, oil or clays
• Lack of Paralell-ness of fusion faces
• Misalignment of surfaces
• Time, temperature and pressure deviations
• Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact john@excelplas.com

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to john@excelplas.com
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2020 Copyright ExcelPlas Labs 🔬

May 2020 Vol. 1

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Failure

Keep Up-to-Date During Corona Isolation with PPN


NEWSMAKERS:  * COVID-19 * ExcelPlas  * FUSION GROUP * Georg Fischer * IPLEX * McElroy * REHAU * UPONOR * Vinidex

Vinidex Launches New PE Pipe with Superior Resistance to Chlorine and High Temperatures than Existing PE100
https://www.vinidex.com.au/products/pe-systems/pe-pipe/chlorblue/

Iplex Pipelines Seeking Innovation Manager
https://moretonbayjobs.com.au/job/innovation-manager-iplex-pipelines-full-time-brendale/

Vinidex Parent Aliaxis Reports 3.1 Bill Revenue for 2019 FY (Declassified)
https://aliaxis.com/wp-content/uploads/2020/04/ALI013-JV2019-Business-Overview-028-singles-inclu-cover.pdf

Rehau Appoints New CEO and CFO
https://www.hpac.com/around-the-web/press-release/20929627/new-ceo-and-cfo-at-rehau

GF Piping Produces Video on Common Mistakes with Electrofusion Pipe Fittings
https://www.youtube.com/watch?v=aArTN63563k

McElroy Offering New Online Pipe Fusion Training
https://www.pipeliner.com.au/2020/04/30/mcelroy-offering-new-online-fusion-training/

CASE STUDY – Polyethylene Piping Systems in the Mining Sector [PDF]
https://www.fusiongroup.com/download/case_studies/Polyethylene-Piping-Systems-in-the-mining-sector.pdf

Global HDPE Product Overview for Gas and Water [PDF]
https://www.fusiongroup.com/download/brochures/Fusion-Global-PE-product-overview-V4-March20-low-res.pdf

Iplex EZIpit® 1000 Maintenance Hole (MH) Successfully Appraised by WSAA
https://www.iplex.com.au/news-and-case-studies/news/ezipit/

Investigating Peak Stresses in Fitting and Repair Patches of Buried Polyethylene Gas Pipes
https://link.springer.com/article/10.1007/s11709-019-0587-6

Lifetime Calculation of Soil-Loaded Non-Pressure Polymer Pipes
https://www.scientific.net/KEM.827.141

The Effect of Branched Structure on the Lamellae Evolution under Uniaxial Extension and SCG Resistance of HDPE Pipe Resins
https://www.sciencedirect.com/science/article/abs/pii/S0142941820304840

Tracking Accelerated Aging of Cross-Linked Polyethylene (PEX) Pipes by Infrared Spectra
http://meetings.aps.org/Meeting/MAR20/Session/G34.11

Impacts of Organic Matter Migrating from Pipe Materials on Microbial Regrowth in Drinking Water
https://www.jstage.jst.go.jp/article/jwet/18/1/18_19-078/_article/-char/ja/

Modelling and Parametric Study of a Gasketed Bell and Spigot Joint in a Buried HDPE pipeline
https://www.sciencedirect.com/science/article/abs/pii/S0886779819311071

Design of Polyethylene Pipeline Leakage Monitoring System Based on Fusion of Multiple Signal Sources
https://iopscience.iop.org/article/10.1088/1755-1315/440/2/022107/pdf

Risk Assessment of an Urban Natural Gas Polyethylene Piping System
https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29PS.1949-1204.0000440

As Steel Prices Rise, PP-R Piping Sees Itself as Stable Alternative
https://www.contractormag.com/piping/press-release/20883260/as-steel-prices-rise-ppr-piping-sees-itself-as-stable-alternative

Uponor Offers New ProPEX® Brass Transition Fittings for PEX Hydronic Piping Applications
https://www.contractingbusiness.com/commercial-hvac/article/20868738/uponor-offers-new-propex-brass-transition-fittings-for-pex-hydronic-piping-applications

ExcelPlas Polymer Testing Laboratory for Polymer Pipe Testing
Materials characterization, failure analysis, quality control, and materials and process development services are offered to polymer pipe manufacturers, installers and end users.  Our analytical techniques allow us to assess elemental and chemical material composition, thermal properties, coating thickness, electrochemical properties, surface chemistry, surface wetting, corrosion rates and pitting potentials, contamination and degradation problems, metallography, fractography, phase transitions, static coefficient of friction, adhesive bonding strength and causes of adhesive bonding failures, surface tension and surface energy, tensile and compressive strength, bend deflection, elasticity properties, UV and visible light absorption and reflection, density and porosity, and many other material properties integral to improving your piping products.  We have conducted analyses on a broad range of materials processed in a multitude of ways and used in thousands of applications in many hundreds of environments.
https://www.excelplas.com/

Our capabilities give us many powerful tools to apply to your materials and process evaluations to enhance your product and productivity. We produce comprehensive written reports to ensure that you can fully understand and independently examine the analytical results and conclusions. This establishes a documented history for future process and product development and quality control issues.  It is usually a great idea to also characterize your materials when all appears fine as a baseline for comparison should any future problems with your materials or their processing occur.
https://www.excelplas.com/

Australian Poly Solutions Specialises in HDPE Pipe Fusion Welding and Hydrostatic Testing Services with Knowhow and Experience you can rely on
https://www.aussiepoly.com.au/

RITMO: APP – SET & GO! PRO Butt Fusion for Pressure Pipe
https://www.ritmo.it/en/butt-fusion-for-pressure-pipe/app-set-go-pro/
Video: https://youtu.be/YP4GmmBdufU


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australian Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3 mm to 80 mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia & NZ. All testing is carried and out in accordance with ISO & ASTM methods and is fully accredited to ISO 17025 by NATA.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 20mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia and Asia. 
All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.
• Butt Fusion Weld Testing
• Weld Testing
• Testing of Electro-fusion Welds
• Tear on saddle joints
• Crush De-cohesion of Electro-fusion welds
• Polymer & Plastics Identification
• Chemical & Thermal Testing
• Site Audits
http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.
  • http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:
• Lack of scraping
• Inaccurate scraping
• Contamination from dirt, water, oil or clays
• Lack of Paralell-ness of fusion faces
• Misalignment of surfaces
• Time, temperature and pressure deviations
• Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact john@excelplas.com

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to john@excelplas.com
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2020 Copyright ExcelPlas Labs 🔬