Thousands of WA Families Plagued by Defective Plumbing Pipe, with No Help from Government

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aldyl™ * Aliaxis * Australian Plastic Piping Failures * BGC * DuPont * Electrofusion * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer Piping * Iplex * Microplastics * PE100 * PE100 Association * PEX-a Pipes * Plastic Pipe Failures * Polybutylene Pipe Failures * Pro-Fit™ * PVC Pipe * Rollepaal * Sintex * Uponor * YLEM

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

BREAKING NEWS

Thousands of WA Families Plagued by Defective Plumbing Pipe, with No Help from Government

Western Australia Government Probes Injuries in Homes with Fletcher’s Iplex Pipes

Perth’s Exploding Pro-fit Water Pipes: Who’s to Blame? What Next?

Market Braces for Equity Raise by Iplex Parent Fletcher Building

Fletcher Building: Cracks Widen on Blowouts, Construction Downturn

Federal Bill Calls for Removal of HDPE Pipe Linked to Deadly Explosions

Lawsuit Over Uponor PEX Pipe Failure in USA | Particulars

INDUSTRY NEWS

Rollepaal Enters Exclusive Partnership for PVC-O Pipe Technology with Sintex in India

PE100+ Association Updates its Approved List of Quality PE100 Resins
The PE100+ Association ensures the very highest quality of PE100 products by continuously monitoring three fundamental properties: 1) Creep Rupture Strength,  2) Stress Crack Resistance and 3) Resistance to Rapid Crack Propagation. 

HDPE Pipe Company Initial Public Offering (IPO)

Former CEO of Aliaxis EMEA Named President of JELD-WEN Europe

Human Consumption of Microplastics from Water Pipes via Food Type and Habits: Recent Review

Review on Recycling of Cross-Linked Polyethylene (PEX) Pipes

Evaluation of Ageing Process of PA11 from Offshore Flexible Pipes

PVC PIPES

Study of Mechanical Properties of Solvent Cement Connection for PVC Pipes

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

New Study Finds Replacing Plastics Pipes with Alternatives Is Worse for Greenhouse Gas Emissions in Most Cases

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:   * Australian Plastic Piping Failures * BGC * Electrofusion * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer Piping * PE100 * PE-RT Pipes * PEX-a Pipes * PIPA * Plastic Pipe Failures * Polybutylene Pipe Failures * PVC4Pipes * PVC Pipe * PVDF * Rio Tinto * Uponor

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

INDUSTRY NEWS

New Study Finds Replacing Plastics Pipes with Alternatives Is Worse for Greenhouse Gas Emissions in Most Cases
Municipal Sewer Pipes (PVC vs Concrete Vs Ductile Iron) and Residential Water Pipes (PEX vs Copper)

Statement on Integration of GF and Uponor – Mutually leveraging Their Strengths

Current Status of Inspection and Repair of Difficult Drainage Pipelines

In-pipe Ultrasonic Inspections of Mud and Tailing Lines at Rio Tinto: How to Manage Difficult Pipes, Provide Quality and Accurate Defect Assessments of Steel and HDPE Pipes

PIPA Updates POP004 Industry Guidelines for Polyethylene Pipe and Fittings Compounds

PVC4Pipes Publishes New Article to Promote PVC Pipes
PVC was the pipe material with the lowest break rate

Performance Evaluation and Optimization of Existing Water Supply Distribution System Using WATERGEMS

HDPE PIPES

Diffusion of Sour Gases and Hydrocarbons to Underlying PE-RT Pipes through Thin Barrier Layers of PVDF
Conventional HDPE pipes fails to meet permeation requirements

Structural Characteristics and Improved Thermal Stability of HDPE/Calcium Pimelate Nanocomposites

Effect of Material Properties in Predicting the Fatigue Life of Offshore HDPE Pipelines Subjected to Vortex-Induced Vibration (VIV)

An Investigation into the Physical Mechanisms of Leak Noise Propagation in Buried Plastic Water Pipes

Securing Offshore Resources: A Mathematical Investigation into Gas Leakage in Long-Distance Flexible Polymer Pipes

PVC PIPES

Study of Mechanical Properties of Solvent Cement Connection for PVC Pipes

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

Australian Pipe Fittings Manufacturer Philmac (Part of Aliaxis Group) in US Export Push

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * BGC * Bio-Polyethylene * CSG * Darwin PB Pipe Failures * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer Piping * IPEX * Iplex * INEOS * McElroy * Microplastics * PE100 * Philmac * Plastic Pipe Failures * Polybutylene Pipe Failures * PVC Pipe * SABIC * Uponor

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

INDUSTRY NEWS

Australian Pipe Fittings Manufacturer Philmac (Part of Aliaxis Group) in US Export Push

Cutting Edge of Sustainability? Here’s The World’s First Bio-Polyethylene Pipeline

GF Piping Stock Soars on Completion of Uponor Acquisition

Uponor Hopes New Owner (GF) will Accelerate its Mexico, South America Growth

Firefighters Battle Large Blaze at Polyethylene Pipe Factory

Australian CSG Continues to Grow and Increase Demand for HDPE Pipe

Max Achievements from Iplex and its Pipe Solutions

Multiple Polybutylene Plumbing Pipe Failures Hit Darwin [PDF]

Uponor Focuses on Radiant and Hydronics to Help Achieve 2027 Sustainability Goals

IPEX by Aliaxis Seeking Project Engineer/Project Specialist

PE PIPES

Study on the Impact of Soil Environment Organic Substances on the Ageing of Urban PE Gas Pipes in Service [PDF]

Improving the Resistance of HDPE Pipes to Chlorine Oxidation by the Addition of Graphene Nanoplatlets (GNP) for Trapping Free Radicals [PDF]

Comprehensive Review of Polyethylene Pipes: Failure Mechanisms, Performance Models, Inspection Methods, and Repair Solutions [PDF]

Study on HDPE and PVC Pipe Failure Analysis in Water Distribution Systems Using Logistic Regression

Protection of Buried PE100 Pipelines from High-Speed Train Vibrations with Expanded Polystyrene Geofoam

SABIC Patent New PE Pipe for Chlorinated Water

Tracing the Origins of Plastics in Biosolids: The Role of Sewerage Pipe Materials and Trade Waste

PVC PIPES

The Bearing Capacity Performance of U-PVC Pipe Under Axial Compression

Study of Effects of PVC Microplastics from Erosion of Plumbing Pipes on the Star Fish and Frogs

Tracing the Origins of Plastics in Biosolids: The Role of Sewerage Pipe Materials and Trade Waste

REINFORCED PLASTIC PIPES

Comparative Study on the Post-Buckling Behaviour of Reinforced Thermoplastic Pipes (RTPs) Under External Pressure Considering Progressive Failure

Strain and Damage Monitoring of Optic Fiber Sensor-Embeded Carbon-Fibre Reinforced Polymer Confined Cracked Pipes

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

World’s First – Sustainable HDPE Gas Pipeline Made from Wood

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * BGC * Bio-Polyethylene * Darwin PB Pipe Failures * Electrofusion * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer Piping * Hydrogen Transport * Iplex * INEOS * McElroy * Microplastics * PE100 * PEX-a Pipes * Plastic Pipe Failures * Polybutylene Pipe Failures * PVC Pipe * Uponor * YLEM

BREAKING NEWS

World’s First – Sustainable HDPE Gas Pipeline Made from Wood (WTF)

BGC Announces it Will Commence a Recall Program for the PB Pipes Manufactured by Fletcher Building Company Iplex in March this Year

Multiple Polybutylene Plumbing Pipe Failures Hit Darwin [PDF]

INDUSTRY NEWS

Is PE100 Pipe Really the Best Pipe for Hydrogen Transport?

Dutch Pipe Study on Long-Term Influences of Pipe Material such as PVC on Bacterial Communities of Matured Biofilms (>40 Years’ Old) in Drinking Water Distribution System

Swiss Plastic Companies Create Plastic Piping Waste Circularity Initiative

HDPE Pipe Welding Titan McElroy names Michael Grant Vice President of Operations

‘Extreme Cold Temperatures’ Crack PVC Gas Pipe in Kansas, Contaminating the Water System

HDPE Pipe Implicated in Generated Microplastics in the Marine Environment

Examining Plastic Pipe Trends in Commercial Markets
Key trends to watch in 2024.

Board of Directors of Uponor Cancels Treasury Shares

HDPE PIPES

Investigation of the Notch Impact on the Internal Pressure Resistance of HDPE Pipes: An Experimental and FEA Study

Influence of Accelerated Aging (Temperature and Acid Attack) on the Mechanical Properties, Structural, and Morphological Characteristics of HDPE Sewer Pipes

Optimization of Hot Melt Welding Process of PE Pipeline Based on Finite Element Method

ELECTROFUSION WELDING

Study on the Detection Method of HDPE Electro-Fusion Welding Defects Based on X-ray Technology

PVC PIPE

Corroded Iron Pipe Inhibits Microbial-mediated Mn(II) Oxidation and MnOx Accumulation Compared to PVC Pipes

HYDROGEN TRANSPORT

Investigation of Hydrogen Solubility and Diffusivity in PVC, HDPE and PVDF Pipes Materials

Experimental and Computational Failure Analysis of Hydrogen Embrittled Steel Cords in a Reinforced Thermoplastic Composite Pipe

MICROPLASTICS & THE ENVIRONMENT

Revealing the Long-term Impact of Photodegradation and Fragmentation on HDPE Pipe in the Marine Environment: Origins of Microplastics and Dissolved Organics

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

Borouge Signs $43.5 Million PE100 Pipe Resin Supply Agreement

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * Basell * BGC * Borealis * Borouge * CPVC * EPA * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer * Iplex * Microplastics * PE100 * PEX-a Pipes * Plastic Pipe Failures * Polybutylene Pipe Failures * PPI * PP-R * Pro-Fit™ * Uponor * US-EPA * Vinyl Chloride * Vinidex * YLEM

INDUSTRY NEWS

Borouge Signs $43.5 Million PE100 Pipe Resin Supply Agreement with NAFFCO

Borealis Seeking Application Marketing Manager, Infrastructure (Plastic Pipes)

Iplex Parent Fletcher Building Says Some NZ Claims Barred from Shareholder Class Action

Aliaxis Strategy Manager Fiorella Cano Participates in New Webinar

Polybutylene Pipes in Your House? Make Plans to Replace Them

Let’s be Specific… Multilayer Composite Pipe (MLCP) Q+A with James Griffiths, Uponor

Perma-Pipe International Holdings announces acceptance into QatarEnergy’s Program

Circular Economy Roundtable Initiated by GF Piping Systems Concludes Successful Build-up Phase

Viega PEX: A Case of Leaky Lawsuits

Vinyl Institute Accepting VIABILITY PVC Recycling Grant Applications

NEW RESEARCH

Deep Learning Analysis of the Propagation of Stabilizing Additive Hydrolysis in a Cross-Linked Polyethylene Pipe (PEX-a) [PDF]

Accelerated Thermal-Oxidative Aging and Degradation Mechanism of HDPE Butt-Fusion Welded Joint [PDF]

Composite Pipelines: Analyzing Defects and Advancements in Non-Destructive Testing Techniques [PDF]

Effect of Butt Fusion Welding Process Parameters on Mechanical Properties and Residual Stress of PE Pipeline [PDF]

Evaluation of Aging Mechanical Properties of Polyethylene Based on Indentation Testing Technology

Effect of Butt Fusion Welding Process Parameters on Mechanical Properties and Residual Stress of Polyethylene Pipeline

Study on the Detection Method of HDPE Electro-Fusion Welding Defect Based on X-ray Technology [PDF]

Using J-integral Analysis to Predict the Failure of HDPE Pipes Under Crack Face Load and Internal Pressure

Prediction of the Mechanical Behaviour of HDPE Pipes Using the Artificial Neural Network Technique

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.