PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing
Global News on Plastic Piping and Fittings
NEWSMAKERS: * Aliaxis * Asahitec™ * Blansol * ExcelPlas * F.W. Webb * GF Piping * IPLEX * McElroy * PEXX * PIPA * PPI * PPN * PP-R * RWC * SABIC
INDUSTRY NEWS
IPLEX Goes Large with 1800 mm Diameter PE Pipe
https://www.pipeliner.com.au/2021/06/03/iplex-goes-large-with-pe-pipe/
F.W. Webb Named New Distributor of McElroy Fusion Equipment
https://www.supplyht.com/articles/104052-fw-webb-named-distributor-of-mcelroy-fusion-equipment
RWC List of Price Increases [PDF]
https://www.tubefit.com.au/wp-content/uploads/2021/05/RWC-Price-Increase-update-26.05.2021.pdf
Piping Project for Saltwater Disposal Plant Wins PPI Award
https://www.watertechonline.com/industry/oil-gas/article/14204461/plastics-pipe-institute-piping-project-for-saltwater-disposal-plant-wins-ppi-award
Sliplining Rehabilitation Offers Solution for Providence Water
Providence Water has taken vigilant measures before an issue becomes a disaster and embarked on a systematic and comprehensive inspection, repair, and risk assessment program.
https://www.waterworld.com/wastewater/press-release/14204303/sliplining-rehabilitation-offers-solution-for-providence-water
Advantages of Industrial Blansol’s PEX-A Pipes
https://www.blansol.com/pex-multilayer/pexa-pipe/
GF Piping Systems – “We make Process Automation Easy”
https://www.youtube.com/watch?v=DPVG1dU4g8Y
GF Piping’s Mark Bulmer and Charles Freda Speak About How Engineered Plastic Piping Systems can Offer Enhanced Mission-Critical Cooling in Data Centres
https://www.hpac.com/industry-event-news/article/21137958/gf-piping-systems-to-present-at-dcd-keeping-it-cool-virtual-conference
NEW RESEARCH
Investigation on SABIC Polyethylene of Raised Temperature Resistance (PE-RT) Service Performance Using an Autoclave Test
https://www.degruyter.com/document/doi/10.1515/epoly-2021-0029/html
Structural Response of Non-perforated and Perforated Corrugated HDPE Pipes Under Variable Loading
https://www.sciencedirect.com/science/article/abs/pii/S1537511021001021
Systematic Literature Review of the Application of Extended Finite Element Method in Failure Prediction of Pipelines
https://www.sciencedirect.com/science/article/pii/S2667143321000299
Influence of the Temperature On the Hydraulic Resistance of HDPE Pressure Pipes
https://www.e3s-conferences.org/articles/e3sconf/pdf/2021/39/e3sconf_form2021_04004.pdf
Study on Numerical Analysis Method of Onshore Launching System Design for Over-length With Large Diameter HDPE Pipe
https://iopscience.iop.org/article/10.1088/1755-1315/768/1/012160/pdf
Cooling and Annealing of Plastic Pipe
https://www.sciencedirect.com/science/article/abs/pii/S2451904921001323
Rupture of an Industrial GFRP Composite Mitered Elbow Pipe
https://www.mdpi.com/2073-4360/13/9/1478/htm
NEW JOBS
PEXX Pty Ltd. Seeking Experienced Machine Operators (CEO David Freund)
https://au.linkedin.com/jobs/view/experienced-machine-operators-at-pexx-pty-ltd-2421615253?refId-qjfo3e2RaqTql9nNLcwlcA
BRAND MARKETING
How to Get Noticed by More Than 40,000 People in the Poly Pipe Space Across the Globe
PPN we reaches over 40,000 people each month and this high level of audience engagement comes from years of creating content that matters to the plastic pipe industry.
We provide the industry’s most reliable and current information, and have the trust and attention of the leaders and decision makers.
Not only can we help you get in front of our highly engaged audience, but we also have a number of channels you can use to target your message – as well as the subject matter experts to put it all together.
https://www.youtube.com/watch?v=eUKxWbOZY10
Do You Have Any Poly Pipe News? – Get in Touch
https://www.excelplas.com/contact-us/
COMMUNICATE YOUR BRAND TO A GLOBAL AUDIENCE WITH JUST ONE CLICK
PPN – Your Global Source of Plastic Piping News and Technology
https://www.polypipenews.com.au/
MORE NEWS
Get More Poly Pipe News
https://www.polypipenews.com.au/
ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC & CPVC pipes as well as composite GRP and GRE pipes. When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g. oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc). ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/
ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason. The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/
Australian Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3 mm to 80 mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia & NZ. All testing is carried and out in accordance with ISO & ASTM methods and is fully accredited to ISO 17025 by NATA.
http://www.excelplas.com/
Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state of the art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 20mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies and local Authority customers throughout Australia and Asia.
All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.
• Butt Fusion Weld Testing
• Weld Testing
• Testing of Electro-fusion Welds
• Tear on saddle joints
• Crush De-cohesion of Electro-fusion welds
• Polymer & Plastics Identification
• Chemical & Thermal Testing
• Site Audits
http://www.excelplas.com/
ExcelPlas – the Australian Pipes & Fittings Testing Laboratory
- Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
- The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
- Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.
- http://www.excelplas.com/
ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes
ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/
New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/
ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:
• Lack of scraping
• Inaccurate scraping
• Contamination from dirt, water, oil or clays
• Lack of Paralell-ness of fusion faces
• Misalignment of surfaces
• Time, temperature and pressure deviations
• Not adhering to cool times
We have extensive experience in inspection of poly pipe welds for assuring welded joint quality. Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]
Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/
This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.
Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;
Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.
Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/
2021 Copyright ExcelPlas Labs
PPN is owned and operated by ExcelPlas Pty Ltd. By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports. These email contact details allow PPN to track page views and create more targeted and relevant content. PPN provides an unsubscribe link on the bottom of each PPN newsletter.
