Iplex Defective Pipe Saga

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * ASTM * BGC * BOREALIS * CPVC * ExcelPlas * Failure Analysis * Georg Fischer Piping * IPEX * Iplex * IR Welding * PE100 * PE100 Association * PEX Pipe * Plastic Pipe Failures * Polybutylene Pipe Failures * PVC-O Pipe * PVC-U Pipes * REHAU * Uponor * Vinidex

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

BREAKING NEWS

Iplex Defective Pipe Saga: BCG, Fletcher Building to Meet Over Perth Building Crisis

Perth Pipe Crisis: BCG, Fletcher Building Agree on Mediation Talks Led by Former Justice Chaney

Breakthrough in Perth’s $1b-plus Burst Pipes Crisis

Pipe Association Doubles Down and Promotes PB Pipes as the ‘Most Technically Advanced Plastic Piping” Despite Widespread Field Failures

INDUSTRY NEWS

Association Acts Against ‘Suspect’ Plastic Pipes

Call for Stricter Standards for HDPE Pipes
Immediate adoption of the latest ISO 4427:2023, with an increased OIT (Oxidation Induction Time) test value of 30 minutes at 210°C and a maximum 20% shift in OIT value from raw material to the final product.

Plastic Pipe Company Expands Operations with investment of More than USD 13 million

Borealis Spearheads Carbon-Based Value Chain Transformation

City Reviewing Permit for IPEX (Aliaxis) Factory in Florida

ASTM Issue Update ASTM F1281-24 – Standard Specification for Crosslinked Polyethylene/Aluminium/Crosslinked Polyethylene (PEX-AL-PEX)

New ASTM Standard for Butt Fusion of Nylon Pipes

Crackdown on PVC Pipe Manufacturer for Fake ISI Marks

Copper Pipes Lobby Warns of Killer Plastics Pipes

NEW STUDIES

Analysis of HDPE Water and Gas Pipes for Micro-Structural Defects Using Advanced Instrumental Techniques

Lifecycle Cost Benefits of PVC-U Pipes in Europe

Vision-Based Measurement Method for Geometric Dimensions of PVC Pipes

Detecting a Premature Crack and Bending on a PVC Water Pipe Using Differential Hoop Strain

Seismic Vulnerability Assessment of Buried HDPE Gas Pipeline Network Based on Comprehensive Weight Cloud Model

Evaluation of Damage and Failure Analysis of CPVC pipes

HOW CPVC BETTER RESISTS BIOFILM FORMATION THAN OTHER PIPING MATERIALS

THE DOS AND DON’TS OF CPVC PIPING SOLVENT CEMENT WELDING

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

Plastic Pipe Failure – Solve Problems, Limit Damage and Avoid Future Failures
Where polymer pipes are used in engineering applications, reliable and consistent performance is critically important. Failure can have damaging and expensive consequences. We offer expertise in materials properties and durability – with a range of specialist testing and analysis.
 ExcelPlas Labs can help you:

• Understand plastic pipe materials and test their performance properties and durability
• Specify and select polymers based on service requirements
• Understand and recognise how plastic pipes and fittings can fail
• Appreciate how to investigate plastic pipe failures
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 30 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10

•    Join the thousands of industry leaders who rely on PPN for domestic and international plastic pipe news.
•    Experience https://www.polypipenews.com.au/ weekly to get the industry view on what’s newsworthy today.
•    Discover PPN’s in-depth coverage of new technology and products, marketing, and executive actions.


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

Aliaxis Maintains Strong Profitability in 2023 Despite Challenging Market Conditions

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * BOREALIS * ExcelPlas * Failure Analysis * Georg Fischer Piping * Iplex * IR Welding * PE100 * PE100 Association * PEX Pipe * Plastic Pipe Failures * Polybutylene Pipe Failures * PVC-O Pipe * PVC4Pipes * REHAU * Uponor * Vinidex

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

INDUSTRY NEWS

Aliaxis Maintains Strong Profitability in 2023 Despite Challenging Market Conditions

New Method to Produce PEX Pipes More Quickly has been Developed by Borealis
New method to produce cross-linked PE pipes more quickly has been developed by Borealis (PEX material supplier), Crosslink Finland, Hans Weber & Inoex (machinery suppliers for PEX based peroxide cross linked PEX pipes).
This new method is a single stage process that crosslinks PEX pipe immediately after emerging from the extruder head with the help of high power, short wavelength infrared radiation. This new process leads to shorter heating time and special vacuum calibration that produces PEX pipe with narrower tolerances.

America Is Replacing Its Pipes: Is Ductile Iron Pipe a Good Alternative for Plastic Pipes?

Redefine tomorrow: GF Piping Systems introduces the new IR-63 M fusion machine for Optimized Infrared Welded of Plastic Pipes

Transcript of Meeting Australian Workers’ Union and Vinidex Pty Limited (An Aliaxis Company)

Understanding The Four Main Different PVC Pipe Categories

Major HDPE Pipe Fire in India

Calls for Police Probe After Massive Fire Destroys HDPE Pipes

How to Deal with Challenges when Pipe Bursting Goes Wrong

Queensland University Develops New Fish Cage Technology Made from HDPE Pipes for Offshore Fish Farming

NEW DEVELOPMENTS

Characterization of Polyethylene Pipe Properties Through Advanced Metrology Techniques

Experimental Investigation of Buried Flexible HDPE pipe

Preparation of De-crosslinked Polyethylene from Waste Crosslinked Polyethylene (PEX) Using Supercritical Twin-Screw Extrusion

Loading Capacities of Bonded Composite Pipe Joints of Different Structures

A Vitrimer Acts as a Compatibilizer for Polyethylene and Polypropylene Blends for Plastic Pipes

MICROPLASTICS FROM PLASTIC PIPES

Microplastics and Chemical Leachates from Plastic Pipes are Associated with Increased Virulence and Antimicrobial Resistance Potential of Drinking Water Microbial Communities

Plastic Pipes, Microplastics & Impacts on Human Health | Safe Piping Matters

Researchers Testify on Impact of Microplastics in Water

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

Plastic Pipe Failure – Solve Problems, Limit Damage and Avoid Future Failures
Where polymer pipes are used in engineering applications, reliable and consistent performance is critically important. Failure can have damaging and expensive consequences. We offer expertise in materials properties and durability – with a range of specialist testing and analysis.
 ExcelPlas Labs can help you:

• Understand plastic pipe materials and test their performance properties and durability
• Specify and select polymers based on service requirements
• Understand and recognise how plastic pipes and fittings can fail
• Appreciate how to investigate plastic pipe failures
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 30 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10

•    Join the thousands of industry leaders who rely on PPN for domestic and international plastic pipe news.
•    Experience https://www.polypipenews.com.au/ weekly to get the industry view on what’s newsworthy today.
•    Discover PPN’s in-depth coverage of new technology and products, marketing, and executive actions.


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

Fletcher Building Ex CEO Ross Taylor Gets a Grilling

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * BGC * ENCAVIS * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer * Iplex * PE100 * PE100 Association * PFAS * Plastic Pipe Failures * Polybutylene Pipe Failures * Prewave * Pro-Fit™ * PVC-O Pipe * RAUTITAN™ Flex Green * REHAU * Ross Taylor * RWC * TeraPlast * Tradelink * Uponor * Vinidex * YLEM

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

BREAKING NEWS

Fletcher Building Ex CEO Ross Taylor Gets a Grilling (Watch Video)

Crisis in Perth: Faulty PB Pipes and the Battle for Accountability

Speculation of Iplex Parent Fletcher Building Sale to French Conglomerate Saint-Gobain

Banks Pitch for Tradelink Sale Mandate
Fletcher Building is in the process of picking an adviser to sell its plumbing supplies business Tradelink

INDUSTRY NEWS

Austrian Pipe Manufacturer to be Acquired by TeraPlast who has Sights on Western European Markets

PVC Pipe Association Publishes New Report Entitled ‘Introduction to Molecularly Oriented  Polyvinyl Chloride (PVC-O) Pipe’ [PDF]

Deferred Plumbing Jobs Sink Reliance Profits
Reliance Worldwide boss Heath Sharp says you can only delay plumbing jobs so long before pipes burst and hot water disappears, with the plumbing supplies business ready for an upturn in projects.

RWC REPORTS RESULTS FOR SIX MONTHS ENDED 31 DECEMBER 2023SALES OF US$589.5 MILLION NET PROFIT AFTER TAX OF US$51.0MILLION // EARNINGS CALL TRANSCRIPT

SUSTAINABILITY NEWS

Aliaxis and ENCAVIS sign 10-Year Green Power Purchase Agreement for the European Business Operations of Aliaxis

REHAU to Power German Plastic Pipe Manufacturing with Wind Energy

REHAU Launches New Sustainable PES-a pipe RAUTITAN Flex Green Which Saves 90% CO2

GF Piping Systems signs contract with Prewave to Identify Sustainability Risk in Supply Chain

MICROPLASTICS FROM PLASTIC PIPES

Microplastics from Plastic Pipes “Cause Serious Health Impacts” – Says New Report

Accumulation, Tissue Distribution, Health Hazard of Microplastics Associated with Plastic Pipes in a Commercially Important Cat fish, Silonia silondia from a Tropical Large-scale Estuary

NEW RESEARCH

Effects of Pipe Deflection and Arching on Stress Distribution and Lateral Earth Pressure Coefficient in Buried HDPE Pipes

Fatigue Crack Growth and Slow Crack Growth of HDPE Pipes Under Internal Pressure

Annular Expansion for Enhanced Orientation and Mechanical Properties of Extruded Amorphous PPESK/PES Pipes

Performance Evaluation Method and Improvement on Butt Fusion Welding Interface of Thick-Walled Bimodal Polyethylene Pipe

Influence of Welding Strength on Welded Joints of Polyethylene Pipeline

Flexural Performance and Damage Evolution of Multiple Fiberglass-Reinforced UV-CIPP Composite Materials for Undergound Pipe Rehabilitation

NEW JOBS

Aliaxis Seeking Commercial Director for UK

Vinidex Hiring Territory Manager for Plastic Pipes in South Australia

Vinidex Hiring Planning & Performance Manager

Vinidex Hiring Brand & Marketing Communication Manager

Vinidex Creates New Role for Brand & Marketing Communication Manager for Plastic Pipes

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

The Ever-Onwards Decline of Iplex Parent Fletcher Building

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * BGC * Borealis * BorSafe™ * Elydan * EPA * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer * Iplex * PE100 * PE100 Association * PFAS * Plastic Pipe Failures * Polybutylene Pipe Failures * Pro-Fit™ * PVC Pipe Failures * RWC * Uponor * Vinidex * Vinyl Chloride Monomer * YLEM

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

BREAKING NEWS

The Ever-Onwards Decline of Iplex Parent Fletcher Building

Manufacturer Behind BGC’s Iplex Pipes Leak Saga Sinks Amid Leadership Shakeup

Minister Sue Ellery Organises Mediation in Hopes of Fixing Perth’s Faulty Pipe Saga After Months of Deadlock

Case Study: Fletcher Building – Proof the Market Does Not Like Surprises

What Will it Take to Fix Iplex Parent Fletcher Building?

INDUSTRY NEWS

Dubai Replacing Stainless-Steel Water Pipes with Polyethylene Pipes for Enhanced Sustainability

EUR 100 Mil Plastic Pipes Maker Up for Sale

Fixing Leaking Pipes with a Magic Pill (Video)

EPA sets PFAS test for HDPE – Caution over use of Polymer Processing Aids

Elydan launches “PROLINEAR RCD”, the Strongest HDPE Pipe for Drinking Water Networks on the Market

Navigating Change: Uponor Corporation’s Acquisition

Uponor’s Operating Profit Increases Amid Turbulent Markets

Uponor Reports Earnings Results for the Fourth Quarter and Full Year Ended December 31, 2023 -February 16, 2024

Plastics Reckoning: PVC Is Ubiquitous, But Maybe Not for Long

RWC Publishes Investor Presentation

Reliance Worldwide Corporation Limited announces an Equity Buyback for $17.8 million worth of its shares

RWC to Acquire Holman Industries

Arbitral Tribunal Appointed for the Arbitration Proceedings Concerning the Redemption of the Minority Shares in Uponor

Why Reliance Worldwide Shares are Pushing Higher

Smart Joint HDPE Pipe and Butt Fusion Fitting Blue

EDITORIALS

Reducing Resin Costs: The Advantages of Physical Foaming for HDPE Pipe Manufacturers

Navigating the Challenges Ahead: Insights for the European Polyolefin Pipe Resins Market in 2024

UPCOMING CONFERENCES

Plastic Pipes 2024 Conference: Pioneering Innovation in the Plastic Pipes Industry

HDPE PIPES

BorSafe™ Super Low Sag HDPE Advances Politejo’s Pipeline Projects

Prediction of the Mechanical Behaviour of HDPE Pipes Using the Artificial Neural Network Technique

Using J-integral analysis to predict the failure of HDPE pipes under crack face load and internal pressure

Modelling the Failures and Decommissioning of HDPE Water Mains and HDPE Water Service Lines with Time-Dependent Factors

PEX PIPES

Radiation Crosslinking of PE-Xc Plastic Pipes

MICROPLASTICS

Plastic Pipes, Microplastics & Impacts on Human Health

PVC PIPES

Plastics Reckoning: PVC Is Ubiquitous, But Maybe Not for Long

USA Publishes Dangers of Vinyl Chloride Monomer (VCM)

HYBRID COMPOSITE PIPES

The Application of High-Resolution, Embedded Fibre Optic (FO) Sensing for Large-Diameter Composite Steel Reinforced HDPE Pipeline Performance under Dynamic Transport Loads

Experimental and Analytical Evaluation of the Performance of Hybrid Steel-CFRP Pipelines at High External Pressures

CURE-IN PLACE COMPOSITE PIPES

Mechanical Evaluation Analysis of Pipe-Liner Composite Structure Before and After Polymer Grouting Rehabilitation

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.

WA Building Commissioner Replaced as Heads Roll at Iplex Parent Fletcher Building

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Australian Plastic Piping Failures * BGC * ExcelPlas * Failure Analysis * FBU * Fletcher Building * Georg Fischer Piping * Iplex * MULTI/JOINT * PE100 * PE100 Association * PEWeldBank * Plastic Pipe Failures * Polybutylene Pipe Failures * Pro-Fit™ * PVC Pipe Failures * STAR * Uponor * Vinidex * Vinyl Chloride Monomer * YLEM

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

PB PIPE FAILURES

WA Building Commissioner Kristin Berger Replaced as Polybutylene Pipe Scandal Deepens and Heads Roll at Iplex Parent Fletcher Building

Iplex Parent Fletcher Building Selling off its Tradelink business in Australia; CEO Ross Taylor and Chairman Bruce Hassall Exit

Iplex Parent Trading Halt Blunder Costs Fletcher Investors

Iplex Parent Fletcher Building Halts Trading Amid Unexpected Costs and Profit Revision

Iplex Parent Fletcher Building Posts $120 M Loss As it Holds Tight that WA PB Pipe Failures Were Caused by Installation

BREAKING NEWS

Impact of Hidden Plastic Pipework on Insurance Claims Costs Laid Bare – Insurance Post

Failed HDPE Pipe Leaks Significant Raw Sewage into Major River

Analysis and Modelling of HDPE and PVC Pressure Pipe Failures in Auckland, New Zealand

PE Pipe Weld Program for Digital Asset Management Can Minimise Risk and Maximise Compliance
PEWeldBank, designed for HDPE pipe welding, can assist in minimising weld failure events that can cause huge repair costs, interruption to supply, infrastructure damage and potential OH&S implications.

FBG Strain Sensing Technology-based Plastic Gas Pipeline Leak Monitoring and Accurate Location

EPA Begins Investigation Process That Could Ban Vinyl Chloride Monomer (VCM) Used to Make PVC Pipes: ‘that Accident Was A Chilling Warning’

New Research Reveals Up To 36 Million Pounds Of Toxic Pvc Monomer Are Transported Across North American Railways At Any Moment—putting Millions At Risk

INDUSTRY NEWS

STAR Piping Group Expands its Portfolio with the Establishment of STAR Engineering Systems GmbH in Wesel

GF Piping Systems extends the MULTI/JOINT[®] 3000 Plus Product Range with New Dimensions for Water Transport Polyethylene Pipes

StormFLO® by Vinidex – a Groundbreaking PE Stormwater Drainage Pipe

Far Eastern Polyethylene Pipe Plant Begins Construction on New Factory

CONDITION ASSESSMENT

ExcelPlas Pipe Condition Assessment (PCA)
Owners and operators of plants have been using thermoplastics for many years, transporting water, gas and chemicals along their process. However, for operational and maintenance purposes, the asset integrity of the piping system is required. This could be for a number of reason, such as piping system maintenance, ability to maintain current service conditions. EP offers its 30 plus years of plastic piping application experience to assess the fitness for service of used piping. Our specialists inspect the samples in our state-of-the-art accredited materials testing laboratory for piping components, to give our clients the necessary information to make an informed decision and next steps during a project’s operational, maintenance or design phases resolve threats to client assets. ExcelPlas offers the following testing to determine the condition of plastic pipes:
Technical Data:

  • Visual Inspection
  • Dimensional check
  • Oxidation Induction Time (OIT)
  • Melt Flow Rate (MFR)
  • Fourier-transform Infrared Spectroscopy (FTIR)
  • Hydrostatic Test
  • Differential Scanning Calorimetry test (DSC)
  • Vicat test
  • Microscopic analysis
  • Report with assessment of the integrity of the piping material

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 25 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.