Plastic Pipe Institute (PPI) Forced to Set the Record Straight

Download PDF

PPN- The Leading Source of Industry News on Polymer Pipes and Plastic Pipe Testing

Global News on Plastic Piping and Fittings in Real-Time


NEWSMAKERS:  * Aliaxis * Amiblu * Australian Plastic Piping Failures * ExcelPlas * Failure Analysis * Fletcher Building * Glynwed * GRP Pipes * Microplastics * PFAS * Perma-Pipe * Plastic Pipe Failures * Polybutylene Pipe Failures * Polymer Pipe Weld Failures * PPI * PP-R * Reliance Worldwide * RWC

PPN News Alerts bringing together the complete supply chain from manufacturers of resins, plastic pipes and fittings, machinery and equipment to specifiers, designers, suppliers and end-users!

BREAKING NEWS

Problems with Polybutylene Pipes Forces the Plastic Pipe Institute (PPI) to Set the Record Straight
The initiative was deemed necessary to eliminate any confusion between polybutylene pipe and PEX pipe because of problems associated with former.
PPI state: “failures of the PB tubing material were attributed to insufficient resistance to hot chlorinated water or inadequate resistance to slow crack growth.” 

INDUSTRY NEWS

SPECIAL FEATURE – Typical Causes of Failures of Plastic Pipe Welded Joints [PDF]

Aliaxis Announces it Delivered €4.1 Billion in Annual Revenue Despite Challenging Market Conditions

Glynwed Changes Name to Aliaxis Utilities & Industry

New Study Find PP-R Pipes Form Greater Amounts of Microbial Biofilm than Copper and Stainless Steel Pipes Potentially Leading to Household Drinking Water Contamination

Plastic Pipe Institute Issues Statement that PFAS Chemicals in EPA’s Regulations are Not Intentionally Added to HDPE, PE-RT, CPVC, and PP Pipes

New Document Provides Seismic Design Criteria for HDPE Pipe Water Mains

Giant HDPE Ocean Outfall Pipe Exposed by Major Beach Erosion in California

Perma-Pipe International Holdings Announces Contract Awards of $5.0 Million in Egypt

Free Pipe Weight Calculator for PVC Pipe

Amiblu Pipes Seeking a Materials Engineer to Join Their Bunch of GRP Nerds

Switching industry-wide from concrete pipes to GRP Pipes could save the annual emissions of a large European country according to RELINE CONFERENCE 2024

New Earthmover Attachment for Lifting Plastic Pipes PIPEBOSS™: Laying Pipes with Safety

Reliance Worldwide Corporation (RWC) Seeking Outside Sales Manager

RESEARCH THAT IS TRENDING

Experimental Study on the Modulus of Soil Reaction for Plastic Pipes Buried in Lightweight Cellular Concrete Backfill

Mechanical Behaviour Analysis of Steel Strip Reinforced Thermoplastic Pipe Under Torsion

Model Test Investigation of Pipe-Soil Interaction under Frost Heave Conditions of Roadbed

PLASTIC PIPE CONSULTANTS

Plastic Pipe Consulting Experts and Services
If you need a team of pipe plastic experts, then ExcelPlas Consulting is the obvious choice – our size is our strength in a market dominated by single consultants.
We provide services on everything from material selection, product testing, processing to failure analysis
https://www.excelplas.com/contact-us/

Plastic Pipe Failure – Solve Problems, Limit Damage and Avoid Future Failures
Where polymer pipes are used in engineering applications, reliable and consistent performance is critically important. Failure can have damaging and expensive consequences. We offer expertise in materials properties and durability – with a range of specialist testing and analysis.
 ExcelPlas Labs can help you:

• Understand plastic pipe materials and test their performance properties and durability
• Specify and select polymers based on service requirements
• Understand and recognise how plastic pipes and fittings can fail
• Appreciate how to investigate plastic pipe failures
https://www.excelplas.com/contact-us/

PIPE FAILURE ANALYSIS

ExcelPlas Investigating Poly Pipe Failures
Through failure analysis & forensic chemistry, we help clients improve product performance, increase profits, & resolve product liability claims with plastic pipes and fittings.
We are dedicated to unmatched excellence in failure analysis, investigative chemistry, material testing, and expert witnessing for plastics, polymers and composites.
With over 30 years of investigative experience, the staff at ExcelPlas are uniquely positioned to help clients resolve the most challenging performance and processing issues related to materials and finished pipes and fittings.
https://www.excelplas.com/contact-us/

MORE POLY PIPE NEWS

PPN the Digital News Platform for Communicating to the Global Plastic Pipe Industry
Send Us Your News!!!  PPN Publishes weekly.
https://www.youtube.com/watch?v=eUKxWbOZY10

•    Join the thousands of industry leaders who rely on PPN for domestic and international plastic pipe news.
•    Experience https://www.polypipenews.com.au/ weekly to get the industry view on what’s newsworthy today.
•    Discover PPN’s in-depth coverage of new technology and products, marketing, and executive actions.


ExcelPlas Labs Pipe Failure Investigations
ExcelPlas Labs have created a new benchmark in failure analysis of HDPE, PP-R, PB and PEX pipes in addition to PVC &  CPVC pipes as well as composite GRP and GRE pipes.  When a plastic pipeline fails to perform as intended, our team can determine the root cause of failure (e.g.  oxidative failure, chemical failure, creep failure, over-stress failure, fatigue failure, design failure, etc).  ExcelPlas are experienced with all plastic piping failure modes and mechanisms including Slow Crack Growth (SCG) Rapid Crack Propagation (RCP), Environmental Stress Crack Resistance (ESCR), Oxidative Stress Cracking (OSC), cyclic fatigue, manufacturing defects, and polymer material problems.
http://www.excelplas.com/

ExcelPlas Strain Hardening Test (SHT) for HDPE Pipes
The SHT in accordance with ISO 18488 is a relatively new, but excellent way to obtain a rapid indication of the Stress Crack Growth (SCG) resistance of your piping material. This tensile test performed at 80°C has become in just a few years the new standard for Batch Release Testing (BRT). And not without reason.  The test requires only a very small amount of material, the results are very reliable with a very low inter-laboratory scatter and the results are available within a few days, regardless of the PE grade. The SHT is usually performed on resin material but it can also be performed on samples taken directly from pipes or sheets. As accredited lab, EXCELPLAS is happy to discuss the possibilities with you, whether it is for BRT, benchmarking, quality control of your (high performing) PE grade or for polymer compliance/ validation.
http://www.excelplas.com/

Australia’s Plastic Pipe Testing Laboratory
ExcelPlas Laboratories provides a comprehensive plastic pipe joint testing service and is equipped with a state-of-the-art laboratory to test a range of polymer materials including polyethylene and polypropylene. ExcelPlas can carry out testing on plastic tube and pipe ranging in wall thickness from 3mm to 1200mm. ExcelPlas Laboratories provide a comprehensive service to Industrial & commercial companies, environmental consultants, Government bodies, and local Authority customers throughout Australia and Asia. All testing is carried and out in accordance with ASTM, ISO & WIS methods and is fully accredited to ISO 17025 by NATA.

  • Butt Fusion Weld Testing
  • Weld Testing
  • Testing of Electro-fusion Welds
  • Tear on saddle joints
  • Crush De-cohesion of Electro-fusion welds
  • Polymer & Plastics Identification
  • Chemical & Thermal Testing
  • Site Audits

http://www.excelplas.com/

ExcelPlas – the Australian Pipes & Fittings Testing Laboratory

  • Accredited to ISO 17025 by the National Association of Testing Authorities (NATA) Australia, and is Australia’s largest laboratory dedicated for the testing of plastic pipes and fittings to various Standards which include Australian, European and International Standards.
  • The staff employed at the laboratory have a combined experience of more than 85 years within the plastics industry specifically with manufacturing, quality control and the research and development of plastic piping systems including HDPE, PEX, PP-R, PVC, U-PVC, M-PVC, O-PVC, ABS, GRP, GRE and PB.
  • Services provided include conformance testing, compliance testing, batch release testing, root cause analysis for field failures and non-destructive testing of samples.

http://www.excelplas.com/

ExcelPlas Lab Specialising in HDPE Pipe Condition Monitoring, Failure Analysis and Testing
In the event of a HDPE buttweld or electrofusion weld failing during initial testing, or in service, we can conduct investigations to assist in identifying the root cause of the failure.
This service also extends to the premature failure of the pipe or fitting itself.
http://www.excelplas.com/plastic-pipes

ExcelPlas Pipe Testing is a Leader in the Field of Polyethylene (PE) and High-Density Polyethylene (HDPE) Testing
ExcelPlas is accredited with the National Association of Testing Authorities (NATA) for butt weld tests, bend and tensile tests, peel decohesion tests on electro fusion sockets and failure mode determination
http://www.polypipetesting.com.au/butt-fusion-welds/

New UHMWPE Pipe for Tailing Offers Greater Than 4X the Abrasion Resistance of PE100 (Australia wide)
http://slurrypipes.com.au/

ExcelPlas Poly Pipe Weld Inspection Lists Top 7 Causes of Weld Failure:

  • Lack of scraping
  • Inaccurate scraping
  • Contamination from dirt, water, oil or clays
  • Lack of Paralell-ness of fusion faces
  • Misalignment of surfaces
  • Time, temperature and pressure deviations
  • Not adhering to cool times

We have extensive experience in inspection of poly pipe welds for assuring welded joint quality.  Direct Poly Pipe Inspection ensures that operators are following the proven welding procedure; this reduces the occurrences of operational errors which lead to defects such as inclusions, lack of fusion (LoF), porosity and misalignment.
More information, contact [email protected]

Get Your HDPE Pipe Products or Services Noticed – Advertise in Poly Pipe News (PPN) Australia
https://www.polypipenews.com.au/advertise/

This Newsletter is brought to you by Excelplas Labs, Australia’s Largest group of Poly Pipe Testing Labs.

Pipe Poly News (PPN) is now Australia’s most current and comprehensive source of news on Polyethylene pipes and Poly Pipe Welding;

Poly Pipe News is now sent to over 4500 Poly Pipe Industry Members every week.

Any news requests should be sent to [email protected]
To subscribe, visit https://www.polypipenews.com.au/subscribe/

2024 Copyright ExcelPlas Labs

PPN is owned and operated by ExcelPlas Pty Ltd.  By subscribing to PPN you agree to receiving regular PPN newsletters as well as the PPN platform using your email contact details to enhance the performance and functionality of PPN and its analytics reports.  These email contact details allow PPN to track page views and create more targeted and relevant content.  PPN provides an unsubscribe link on the bottom of each PPN newsletter.